VISTELLE CO-EXTRUDED ACRYLIC (PMMA)
Product Description
The perfect combination of impact strength, optical clarity, ease of fabrication, cost effectiveness, and wide choice of décors, Vistelle is the solution for many applications.
These co-extruded acrylic panels offer many benefits over back painted or printed cast acrylic including greater thickness control, less contamination in the sheet, high levels of consistency, ease of fabrication, and shorter lead times.
Applications
- Display and POP
- Decorative wall cladding
- Cabinetry cladding
- Signage
Fabrication / Storage / Handling / Product Care
Vistelle co-extruded acrylic can be line bent and cut using standard fabrication processing equipment.
The most common cutting techniques include saw, router and laser. Acrylic sheet is easily drilled using ordinary high-speed steel drill bits, air or water can be introduced as a coolant if required (the use of cutting oils may cause crazing).
Be extremely careful if using taps or self-tapping screws as acrylic is a notch sensitive material.
Rinse sheet with lukewarm water only, do not add detergents or soap to the water.
Using a soft, gentle cloth or sponge, lightly wash to loosen any dirt and residue but do not scrub aggressively or use brushes or harsh instruments. Dry with a soft clean cloth to prevent water spotting. Do not clean in direct sunlight if possible.
Available Sheet Size
- Thickness: 4 mm
- Width: 760 and 1220 mm
- Length: 2600 and 2440 mm
Sheet Appearance
Vistelle acrylic sheets are supplied with high gloss face and protective masking both sides.
Colour Range
- Salt – white
- Mist – glass green
- Tawny – brown
- Blush – red
- Sky – bright blue
- Eclipse – black
Colour matched sheets are available subject to minimum order quantities.
Product Disclaimer
This information provides reliable and accurate data to the best of our knowledge at the time of publishing. Due to our inability to control conditions of use and application, we are unable to make any recommendations or suggestions. The EGR Group (Oakmoore Pty Ltd) assumes no liability for use of information presented herein.
