ZENO XG - PETG- TECHNICAL DATA
DOWNLOAD PDF TECHNICIAL DATA
| ZENO-XG PROPERTIES | VALUE | UNIT | TEST METHOD |
|---|---|---|---|
| GENERAL | |||
| Density | 1.27 | g/cm3 | ISO 1183-1:2019 Method A |
| Water Absorption | 0.3 | % | ISO 62:2008 |
| MECHANICAL | |||
| Tensile Strength | 50 | MPa | ISO 527-2:2012 |
| Tensile Strain at Break | 54 | % | ISO 527-2:2012 |
| Tensile Modulus | 2050 | MPa | ISO 527-2:2012 |
| Flexural Strength | 70 | MPa | ISO 178:2019 Method A,B |
| Flexural Modulus | 2050 | MPa | ISO 178:2019 Method A,B |
| Charpy Impact Strength, Notched | 7 | kJ/m2 | ISO 179-1:2010 |
| Izod Impact Strength, Notched | 7 | kJ/m2 | ISO 180:2000+Amd.2:2013 |
| Rockwell Hardness, L-scale | N/A | ASTM D785 | |
| Rockwell Hardness, M-scale | NA | ASTM D785 | |
| Rockwell Hardness, R-scale | 108 | ASTM D785 | |
Product Disclaimer:
This information provides reliable and accurate data to the best of our knowledge at the time of publishing. Due to our inability to control conditions of use and application, we are unable to make any recommendations or suggestions. The EGR Group (Oakmoore Pty Ltd) assumes no liability for use of information presented herein.
| ZENO-XG PROPERTIES | VALUE | UNIT | TEST METHOD |
|---|---|---|---|
| THERMAL | |||
| Vicat Softening Temperature | 79 | ℃ | ISO 306:2013 |
| Heat Deflection Temperature, 1.82MPa | 64 | ℃ | DIN53752 |
| Coefficient of Linear Thermal Expansion | 7 | m/m.K x 10 -5 | DIN53752 |
| Self Ignition Temperature | 420 | ℃ | ASTM D 1929 |
| Flash Ignition Temperature | 400 | ℃ | ASTM D 1929 |
| Glow Wire Ignition Temperature (4.5 mm) | 700 | ℃ | EC 60695-2-13:2010+A1:2014 |
| Burning Behaviour, Vertical(3 mm) | V-2 | UL 94-2013/ Rev.9-2018 Section 8 | |
| Burning Behaviour, Horizontal (1.5 mm) | HB | UL 94-2013/ Rev.9-2018 Section 7 | |
| Continuous Service Temperature | 55 | ℃ | |
| Short Term Service Maximum Temperature | 65 | ℃ | |
| Moulding Range | 80-140 | ℃ | |
| OPTICAL | |||
| Light Transmission Clear (3mm) | 87 | % | 520nm |
| Light Transmission Grey (3mm) | N/A | % | 520nm |
| Light Transmission Opal (3mm) | 28 | % | 520nm |
| Refractive Index | 1.57 | nD | DIN5036-3 |
| Haze | <1.0 | % | ASM D1003 |
Translating...