ZENOLOY 1000 FR - V0 PC/ABS

Product Description

Zenoloy 1000 – FR is a thermoformable engineered blend of PC/ABS with ignition resistant additives that meet stringent regulations for fire behavior, electrical safety, resistance to chemicals, hydrolysis and heat. With the strength, durability and impact resistance of PC/ABS Zenoloy 1000 FR meets UL94, IEC and ECE R118 standards for thermal plastics, and is ideal for vacuum forming.

Applications

• Mass-transit
• Appliance parts
• Electrical enclosures
• Medical diagnostic equipment covers

Fabrication / Storage / Handling / Product Care

Zenoloy 1000 FR can be thermoformed and cut using standard fabrication processing equipment.

Vacuum forming, free blown forming, and line bending are the most extensively used moulding processes, whilst saw cutting, routing and guillotining are the most common cutting techniques.

PC/ABS sheet is easily drilled using ordinary high-speed steel drill bits, air or water can be introduced as a coolant if required (the use of cutting oils may cause crazing).

Be extremely careful if using taps or self-tapping screws as FR is a notch sensitive material.

Rinse sheet with lukewarm water only, do not add detergents or soap to the water.

Using a soft, gentle cloth or sponge, lightly wash to loosen any dirt and residue but do not scrub aggressively or use brushes or harsh instruments.

Dry with a soft clean cloth to prevent water spotting. Do not clean in direct sunlight if possible.

Available Sheet Size

• Thickness: 2.0 – 8.0 mm
• Width: 800-2050 mm
• Length: 800-4000 mm (longer lengths by negotiation)

Sheet Appearance

Zenoloy 1000 FR sheets are provided in smooth and textured finishes.

Colour Range

Zenoloy 1000 FR sheets are provided in different colours including:

• Black
• White
• Grey

Colour matched sheets are available subject to minimum order quantities.

Product Disclaimer

This information provides reliable and accurate data to the best of our knowledge at the time of publishing. Due to our inability to control conditions of use and application, we are unable to make any recommendations or suggestions. The EGR Group (Oakmoore Pty Ltd) assumes no liability for use of information presented herein.